acontis Real-time Hypervisor - Graphics Passthrough Setup

Table of Contents

• 1. Introduction
• 2. Prerequisites
  • 2.1. Additional information
• 3. Windows Guest configuration
• 4. Windows Guest remote desktop access
  • 4.1. Enable Remote Desktop
  • 4.2. Remote Desktop Settings
• 5. Additional Guest configuration
• 6. Activate vfio driver
• 7. Boot Hypervisor in passthrough graphics mode
• 8. Remote Guest Start
• 9. Connect Guest through RDP
• 10. Download/Install Driver
• 11. Troubleshooting