acontis Real-time Hypervisor & RTOS-32 Remote DBG

Table of Contents

• 1. Step by Step Host and Target Configuration with System Manager and Shell Scripts
  • 1.1. Introduction
  • 1.2. Default values:
  • 1.3. Prerequisites
• 2. Part A - Development Host Configuration
• 3. Part B - Hypervisor Target Configuration
  • 3.1. Adjust brvnetconfig.sh
• 4. Part C - \RtFiles\debug\. Subdirectory
  • 4.1. Recommended
  • 4.2. Copy Debug Monitor
  • 4.3. Visual Studio Project Settings
• 5. Part D - Hypervisor Target Configuration
• 6. Part E - Development Host Configuration
• 7. Important hints